Akee

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Akee
    Participant

    แนะนำ
    1. ใช้ Amibroker
    2. การใช้งานทางชมรมมีแนะนำเบื้องต้นใน YouTube
    3. http://www.wisestocktrader.com/ สูตรต่างๆเอาไว้เพื่อศึกษา

    Akee
    Participant

    _SECTION_BEGIN(“TDST_DeMark_Perl”);

    /* Set Parameters. */

    Plotall=ParamToggle(“Plot all lines “, “No|Yes”,1);
    Plotpercent=Param(“Plot percentage above/below visible range “,20,0,100,5,0);
    gapprox=Param(“Proximity Gap Multiplier”,1,0,5,0.5,0);
    bluedist=Param(“Blue_Multiplier”,1.75,0,10,0.25,0);
    reddist=Param(“Red_multiplier”,0.25,0,10,0.25,0);

    /* Initialise variables. */

    sup1=sup2=sup3=sup4=sup5=sup6=sup7=sup8=sup9=Null;
    res1=res2=res3=res4=res5=res6=res7=res8=res9=Null;

    TDSeqBuy=False;
    TDSeqbuydigits=0;
    TDSeqbuyrisk=TDSeqbuyreward=TDSeqbuyrrratio=TDSeqbuystop=0;

    TDSeqSell=False;
    TDSeqselldigits=0;
    TDSeqsellrisk=TDSeqsellreward=TDSeqsellrrratio=TDSeqsellstop=0;

    supinuse=resinuse=Null;
    supvio=resvio=0;
    tfarray=True;
    distance=ATR(10);

    BCDplot=False;
    BSetupind=BCDind=BCDrisk=0;
    BSmaxr=BSminr=BScnt=BSmaxrc=BSminrc=0;
    CurBSmaxr=CurBSminr=CurBScnt=CurBSmaxrc=CurBSminrc=0;
    PreBSmaxr=PreBSminr=PreBScnt=PreBSmaxrc=PreBSminrc=0;
    CurBCDstart=CurBCD=CurBCD8=CurBCDmaxr=CurBCDminr=CurBCDtext=CurBCDfin=0;
    PreBCDstart=PreBCD=PreBCD8=PreBCDmaxr=PreBCDminr=PreBCDtext=PreBCDfin=0;

    SCDplot=False;
    SSetupind=SCDind=SCDrisk=0;
    SSmaxr=SSminr=SScnt=SSmaxrc=SSminrc=0;
    CurSSmaxr=CurSSminr=CurSScnt=CurSSmaxrc=CurSSminrc=0;
    PreSSmaxr=PreSSminr=PreSScnt=PreSSmaxrc=PreSSminrc=0;
    CurSCDstart=CurSCD=CurSCD8=CurSCDmaxr=CurSCDminr=CurSCDtext=CurSCDfin=0;
    PreSCDstart=PreSCD=PreSCD8=PreSCDmaxr=PreSCDminr=PreSCDtext=PreSCDfin=0;

    /* Identify functions and procedures. */

    /* This function checks the TD Sequential Digits for a valid sequence. */

    function seqcheck(TDSeqdigits,ival)
    {
    Loop=0;
    if (TDSeqdigits[ival-1]>0 AND TDSeqdigits[ival-1]<9)
    {
    Loop=TDSeqdigits[ival-1];
    for (jloop=0; jloop<Loop; jloop++)
    {
    TDSeqdigits[ival-1-jloop]=0;
    }
    }
    return TDSeqdigits;
    }

    /* Fuction to set up support and resistance arrays */

    function supres(supresarray,jval,ival,supresValue)
    {
    global tfarray;

    if (IsEmpty(supresarray[jval]))
    {
    tfarray[ival]=False;
    for (jcount=jval; jcount<(ival+1); jcount++)
    {
    supresarray[jcount]=supresvalue;
    }
    }

    return supresarray;
    }

    /* Prodedures to reset TD Sequential Buy arrays. */

    procedure ResetBScur(Loop,Ival)
    {
    for (j=Loop; j<Ival; j++)
    {
    CurBSmaxr[j]=0;
    CurBSminr[j]=0;
    CurBScnt[j]=0;
    CurBSmaxrc[j]=0;
    CurBSminrc[j]=0;

    CurBCDstart[j]=0;
    CurBCD[j]=0;
    CurBCDmaxr[j]=0;
    CurBCDminr[j]=0;
    CurBCD8[j]=0;
    // CurBCDfin[j]=0;
    CurBCDtext[j]=0;
    }
    return;
    }

    procedure ResetBSpre(Loop,Ival)
    {
    for (j=Loop; j<Ival; j++)
    {
    PreBSmaxr[j]=0;
    PreBSminr[j]=0;
    PreBScnt[j]=0;
    PreBSmaxrc[j]=0;
    PreBSminrc[j]=0;

    PreBCDstart[j]=0;
    PreBCD[j]=0;
    PreBCDmaxr[j]=0;
    PreBCDminr[j]=0;
    PreBCD8[j]=0;
    // PreBCDfin[j]=0;
    PreBCDtext[j]=0;
    }
    return;
    }

    /* Procedure to copy the TD Setup Buy arrays (previous) into the TD Setup Buy arrays (current). */

    procedure CopyBSpre(Loop,Ival)
    {
    for (j=Loop; j<Ival; j++)
    {
    CurBSmaxr[j]=PreBSmaxr[j];
    CurBSminr[j]=PreBSminr[j];
    CurBScnt[j]=PreBScnt[j];
    CurBSmaxrc[j]=PreBSmaxrc[j];
    CurBSminrc[j]=PreBSminrc[j];

    CurBCDstart[j]=PreBCDstart[j];
    CurBCD[j]=PreBCD[j];
    CurBCDmaxr[j]=PreBCDmaxr[j];
    CurBCDminr[j]=PreBCDminr[j];
    CurBCD8[j]=PreBCD8[j];
    CurBCDfin[j]=PreBCDfin[j];
    CurBCDtext[j]=PreBCDtext[j];
    }
    return;
    }

    /* Prodedures to reset TD Sequential Sell arrays. */

    procedure ResetSScur(Loop,Ival)
    {
    for (j=Loop; j<Ival; j++)
    {
    CurSSmaxr[j]=0;
    CurSSminr[j]=0;
    CurSScnt[j]=0;
    CurSSmaxrc[j]=0;
    CurSSminrc[j]=0;

    CurSCDstart[j]=0;
    CurSCD[j]=0;
    CurSCDmaxr[j]=0;
    CurSCDminr[j]=0;
    CurSCD8[j]=0;
    // CurSCDfin[j]=0;
    CurSCDtext[j]=0;
    }
    return;
    }

    procedure ResetSSpre(Loop,Ival)
    {
    for (j=Loop; j<Ival; j++)
    {
    PreSSmaxr[j]=0;
    PreSSminr[j]=0;
    PreSScnt[j]=0;
    PreSSmaxrc[j]=0;
    PreSSminrc[j]=0;

    PreSCDstart[j]=0;
    PreSCD[j]=0;
    PreSCDmaxr[j]=0;
    PreSCDminr[j]=0;
    PreSCD8[j]=0;
    // PreSCDfin[j]=0;
    PreSCDtext[j]=0;
    }
    return;
    }

    /* Procedure to copy the TD Setup Sell arrays (previous) into the TD Setup Sell arrays (current). */

    procedure CopySSpre(Loop,Ival)
    {
    for (j=Loop; j<Ival; j++)
    {
    CurSSmaxr[j]=PreSSmaxr[j];
    CurSSminr[j]=PreSSminr[j];
    CurSScnt[j]=PreSScnt[j];
    CurSSmaxrc[j]=PreSSmaxrc[j];
    CurSSminrc[j]=PreSSminrc[j];

    CurSCDstart[j]=PreSCDstart[j];
    CurSCD[j]=PreSCD[j];
    CurSCDmaxr[j]=PreSCDmaxr[j];
    CurSCDminr[j]=PreSCDminr[j];
    CurSCD8[j]=PreSCD8[j];
    CurSCDfin[j]=PreSCDfin[j];
    CurSCDtext[j]=PreSCDtext[j];
    }
    return;
    }

    /* Begin Assignments. */

    SetBarsRequired(sbrAll);

    /* Identify Bullish and Bearish Price Flips. Then, latch these values. */

    Bullflip=IIf(Close>Ref(Close,-4) AND Ref(Close,-1)<Ref(Close,-5),True,False);
    Bearflip=IIf(Close<Ref(Close,-4) AND Ref(Close,-1)>Ref(Close,-5),True,False);

    Bullhold=Flip(Bullflip,Bearflip);
    Bearhold=Flip(Bearflip,Bullflip);

    /* Identify TD Setup’s – Buy and Sell. */

    Buyconsecdays=IIf(Close<Ref(Close,-4),True,False);
    Buy9Bars=BarsSince(BarsSince(Buyconsecdays));
    Buy9Signal=IIf(Buy9Bars==9,True,False);
    Buy9Req=IIf(Buy9Signal==True AND Ref(Bearflip,-8)==True,True,False);

    BSetupind=IIf(Bearhold==True AND Buy9Bars>=9,True,False);
    BSmaxr=IIf(BSetupind==True,HHV(High,Buy9Bars),0);
    BSminr=IIf(BSetupind==True,LLV(Low,Buy9Bars),0);
    BScnt=Sum(BSetupind,BarsSince(BSetupind==False))+8;
    BSmaxrc=IIf(BSetupind==True,HHV(Close,Buy9Bars),0);
    BSminrc=IIf(BSetupind==True,LLV(Close,Buy9Bars),0);

    Sellconsecdays=IIf(Close>Ref(Close,-4),True,False);
    Sell9Bars=BarsSince(BarsSince(Sellconsecdays));
    Sell9Signal=IIf(Sell9Bars==9,True,False);
    Sell9Req=IIf(Sell9Signal==True AND Ref(Bullflip,-8)==True,True,False);

    SSetupind=IIf(Bullhold==True AND Sell9Bars>=9,True,False);
    SSmaxr=IIf(SSetupind==True,HHV(High,Sell9Bars),0);
    SSminr=IIf(SSetupind==True,LLV(Low,Sell9Bars),0);
    SScnt=Sum(SSetupind,BarsSince(SSetupind==False))+8;
    SSmaxrc=IIf(SSetupind==True,HHV(Close,Sell9Bars),0);
    SSminrc=IIf(SSetupind==True,LLV(Close,Sell9Bars),0);

    /* Prepare Countdown Arrays for TD Setup’s – Buy and Sell. */

    Buyconseccloses=IIf(Close<=Ref(Low,-2),True,False);
    Sellconseccloses=IIf(Close>=Ref(High,-2),True,False);

    /* Get the highest high’s and the lowests low’s to have occurred in the last 9 days. */

    HHV9=HHV(High,9);
    LLV9=LLV(Low,9);

    WhenHHV9=HHVBars(High,9);
    WhenLLV9=LLVBars(Low,9);

    /* Begin TD Sequential – Defining the Trend and Identifying Exhaustion Points. */

    for (i=0; i<BarCount; i++)
    {

    /* Obtain TD Sequential Digits to be plotted. */

    if (Buy9Bars[i]>0 AND Buy9Bars[i]<10 AND Bearflip[i+1-Buy9Bars[i]]==True) TDSeqbuydigits[i]=Buy9Bars[i];
    if (Sell9Bars[i]>0 AND Sell9Bars[i]<10 AND Bullflip[i+1-Sell9Bars[i]]==True) TDSeqselldigits[i]=Sell9Bars[i];

    /* Delete numbers that were created if there is a break in the sequence before 9 is reached. */

    if (i>0 AND TDSeqbuydigits[i-1]>TDSeqbuydigits[i]) TDSeqbuydigits=seqcheck(TDSeqbuydigits,i);
    if (i>0 AND TDSeqselldigits[i-1]>TDSeqselldigits[i]) TDSeqselldigits=seqcheck(TDSeqselldigits,i);

    /* Update current running support and resistance lines */
    /* How many the program will need is unknown !! – Limit is 9 for each. */

    if (i>0)
    {
    if (sup1[i-1]>-1 AND sup1[i-1]<Close[i]) sup1[i]=sup1[i-1];
    if (sup2[i-1]>-1 AND sup2[i-1]<Close[i]) sup2[i]=sup2[i-1];
    if (sup3[i-1]>-1 AND sup3[i-1]<Close[i]) sup3[i]=sup3[i-1];
    if (sup4[i-1]>-1 AND sup4[i-1]<Close[i]) sup4[i]=sup4[i-1];
    if (sup5[i-1]>-1 AND sup5[i-1]<Close[i]) sup5[i]=sup5[i-1];
    if (sup6[i-1]>-1 AND sup6[i-1]<Close[i]) sup6[i]=sup6[i-1];
    if (sup7[i-1]>-1 AND sup7[i-1]<Close[i]) sup7[i]=sup7[i-1];
    if (sup8[i-1]>-1 AND sup8[i-1]<Close[i]) sup8[i]=sup8[i-1];
    if (sup9[i-1]>-1 AND sup9[i-1]<Close[i]) sup9[i]=sup9[i-1];

    if (res1[i-1]>-1 AND res1[i-1]>Close[i]) res1[i]=res1[i-1];
    if (res2[i-1]>-1 AND res2[i-1]>Close[i]) res2[i]=res2[i-1];
    if (res3[i-1]>-1 AND res3[i-1]>Close[i]) res3[i]=res3[i-1];
    if (res4[i-1]>-1 AND res4[i-1]>Close[i]) res4[i]=res4[i-1];
    if (res5[i-1]>-1 AND res5[i-1]>Close[i]) res5[i]=res5[i-1];
    if (res6[i-1]>-1 AND res6[i-1]>Close[i]) res6[i]=res6[i-1];
    if (res7[i-1]>-1 AND res7[i-1]>Close[i]) res7[i]=res7[i-1];
    if (res8[i-1]>-1 AND res8[i-1]>Close[i]) res8[i]=res8[i-1];
    if (res9[i-1]>-1 AND res9[i-1]>Close[i]) res9[i]=res9[i-1];
    }

    /* The following code is essentially for the drawing of the TDST support and resistance lines. */
    /* Test for a new support level and place in an empty support array */

    if (Sell9Req[i]==True)
    {
    /* Determine which support array to use */

    tfarray[i]=True;
    if (tfarray[i]==True) sup1= supres(sup1,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup2= supres(sup2,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup3= supres(sup3,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup4= supres(sup4,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup5= supres(sup5,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup6= supres(sup6,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup7= supres(sup7,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup8= supres(sup8,(i-WhenLLV9[i]),i,LLV9[i]);
    if (tfarray[i]==True) sup9= supres(sup9,(i-WhenLLV9[i]),i,LLV9[i]);

    /* Check to see if we need to erase the lowest support line (all 9 in-use) to make way for the newest. */

    if (tfarray[i]==True)
    {
    for (j=0; j<BarCount; j++)
    {
    sup1[j]=sup2[j];
    sup2[j]=sup3[j];
    sup3[j]=sup4[j];
    sup4[j]=sup5[j];
    sup5[j]=sup6[j];
    sup6[j]=sup7[j];
    sup7[j]=sup8[j];
    sup8[j]=sup9[j];
    sup9[j]=Null;
    }
    sup9= supres(sup9,(i-WhenLLV9[i]),i,LLV9[i]);
    }

    /* Check to ensure the latest addition is in the correct ‘sup’ array. */

    if ((NOT(IsEmpty(sup9[i]) OR IsEmpty(sup8[i]))) AND sup9[i]<sup8[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup9[j];
    sup9[j]=sup8[j];
    sup8[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup8[i]) OR IsEmpty(sup7[i]))) AND sup8[i]<sup7[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup8[j];
    sup8[j]=sup7[j];
    sup7[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup7[i]) OR IsEmpty(sup6[i]))) AND sup7[i]<sup6[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup7[j];
    sup7[j]=sup6[j];
    sup6[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup6[i]) OR IsEmpty(sup5[i]))) AND sup6[i]<sup5[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup6[j];
    sup6[j]=sup5[j];
    sup5[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup5[i]) OR IsEmpty(sup4[i]))) AND sup5[i]<sup4[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup5[j];
    sup5[j]=sup4[j];
    sup4[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup4[i]) OR IsEmpty(sup3[i]))) AND sup4[i]<sup3[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup4[j];
    sup4[j]=sup3[j];
    sup3[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup3[i]) OR IsEmpty(sup2[i]))) AND sup3[i]<sup2[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup3[j];
    sup3[j]=sup2[j];
    sup2[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(sup2[i]) OR IsEmpty(sup1[i]))) AND sup2[i]<sup1[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=sup2[j];
    sup2[j]=sup1[j];
    sup1[j]=swap[j];
    }
    }
    }

    /* Test for a new resistance level and place in empty resistance array */

    if (Buy9Req[i]==True)
    {

    /* Determine which resistance array to use */

    tfarray[i]=True;
    if (tfarray[i]==True) res1= supres(res1,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res2= supres(res2,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res3= supres(res3,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res4= supres(res4,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res5= supres(res5,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res6= supres(res6,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res7= supres(res7,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res8= supres(res8,(i-WhenHHV9[i]),i,HHV9[i]);
    if (tfarray[i]==True) res9= supres(res9,(i-WhenHHV9[i]),i,HHV9[i]);

    /* Check to see if we need to erase the highest resistance line (all 9 in-use) to make way for the newest. */

    if (tfarray[i]==True)
    {
    for (j=0; j<BarCount; j++)
    {
    res1[j]=res2[j];
    res2[j]=res3[j];
    res3[j]=res4[j];
    res4[j]=res5[j];
    res5[j]=res6[j];
    res6[j]=res7[j];
    res7[j]=res8[j];
    res8[j]=res9[j];
    res9[j]=Null;
    }
    res9= supres(res9,(i-WhenHHV9[i]),i,HHV9[i]);
    }

    /* Check to ensure the latest addition is in the correct ‘res’ array. */

    if ((NOT(IsEmpty(res9[i]) OR IsEmpty(res8[i]))) AND res9[i]>res8[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res9[j];
    res9[j]=res8[j];
    res8[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res8[i]) OR IsEmpty(res7[i]))) AND res8[i]>res7[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res8[j];
    res8[j]=res7[j];
    res7[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res7[i]) OR IsEmpty(res6[i]))) AND res7[i]>res6[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res7[j];
    res7[j]=res6[j];
    res6[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res6[i]) OR IsEmpty(res5[i]))) AND res6[i]>res5[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res6[j];
    res6[j]=res5[j];
    res5[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res5[i]) OR IsEmpty(res4[i]))) AND res5[i]>res4[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res5[j];
    res5[j]=res4[j];
    res4[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res4[i]) OR IsEmpty(res3[i]))) AND res4[i]>res3[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res4[j];
    res4[j]=res3[j];
    res3[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res3[i]) OR IsEmpty(res2[i]))) AND res3[i]>res2[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res3[j];
    res3[j]=res2[j];
    res2[j]=swap[j];
    }
    }
    if ((NOT(IsEmpty(res2[i]) OR IsEmpty(res1[i]))) AND res2[i]>res1[i])
    {
    for (j=0; J<BarCount; j++)
    {
    swap[j]=res2[j];
    res2[j]=res1[j];
    res1[j]=swap[j];
    }
    }
    }

    /* Support and resistance arrays ready for plotting. */

    /* Determine which TDST lines are currently being used. */

    supval[0]=sup1[i];
    supval[1]=sup2[i];
    supval[2]=sup3[i];
    supval[3]=sup4[i];
    supval[4]=sup5[i];
    supval[5]=sup6[i];
    supval[6]=sup7[i];
    supval[7]=sup8[i];
    supval[8]=sup9[i];

    resval[0]=res1[i];
    resval[1]=res2[i];
    resval[2]=res3[i];
    resval[3]=res4[i];
    resval[4]=res5[i];
    resval[5]=res6[i];
    resval[6]=res7[i];
    resval[7]=res8[i];
    resval[8]=res9[i];

    /* Hopefully, get a valid support value into the top location. */

    Count=0;
    while (IsEmpty(supval[8]) AND Count<8)
    {
    for (j=0; j<8; j++)
    {
    supval[8-j]=supval[7-j];
    }
    Count=Count+1;
    }

    /* Hopefully, get a valid resistance value into the top location. */

    Count=0;
    while (IsEmpty(resval[8]) AND Count<8)
    {
    for (j=0; j<8; j++)
    {
    resval[8-j]=resval[7-j];
    }
    Count=Count+1;
    }

    /* Record support and resistance values. */

    supinuse[i]=supval[8];
    resinuse[i]=resval[8];

    /* Determine if the current close halts a current support or resistance line. */

    if (TDSeqbuydigits[i]>0 AND (NOT IsEmpty(supinuse[i-1])) AND Close[i]<supinuse[i-1]) supvio[i]=True;
    if (TDSeqselldigits[i]>0 AND (NOT IsEmpty(resinuse[i-1])) AND Close[i]>resinuse[i-1]) resvio[i]=True;

    /* Set flags to indicate completed TD Buy and Sell Countdown sequences. */

    if (i>0)
    {
    BCDind[i]=BCDind[i-1];
    SCDind[i]=SCDind[i-1];

    PreBCDfin[i]=PreBCDfin[i-1];
    CurBCDfin[i]=CurBCDfin[i-1];

    PreSCDfin[i]=PreSCDfin[i-1];
    CurSCDfin[i]=CurSCDfin[i-1];
    }

    /* Check Perl’s Rules for Trading TD Buy Setups Objectively. */

    if (Buy9Req[i]==True)
    {

    /* Perl’s Rule 1: Check for perfected TD Buy Setup. */

    if (Low[i]<Low[i-1])
    tmpval[i]=Low[i];
    else
    tmpval[i]=Low[i-1];

    if (tmpval[i]<=Low[i-2] AND tmpval[i]<=Low[i-3])
    {

    /* Perl’s Rule 2: Check for TDST support violation. */

    tmpval[i]=0;
    for (j=i-8; j<i+1; j++)
    {
    tmpval[i]=tmpval[i]+supvio[j];
    }

    if (tmpval[i]==0)
    {

    /* Perl’s Rule 3: Check the close of TD Buy Setup bar 9 is in close proximity to TDST support. */
    /* This rule is highly subjective. I have chosen the low of bar 9 to be within one ATR distance of the TDST support. */

    if (NOT IsEmpty(supinuse[i]))
    {
    if ((Low[i]-supinuse[i])<distance[i]*gapprox)
    {

    /* Perl’s Risk Management: Calculating the TD Risk Level for Trading a TD Buy Setup. */

    TDSeqBuy[i]=True;
    TDSeqbuystop[i]=LLV9[i]-(High[i-WhenLLV9[i]]-LLV9[i]);
    TDSeqbuyrisk[i]=Close[i]-TDSeqbuystop[i];
    TDSeqbuyreward[i]=resinuse[i]-Close[i];
    TDSeqbuyrrratio[i]=TDSeqbuyreward[i]/TDSeqbuyrisk[i];
    }
    }
    }
    }

    /* Initiate setup for TD Buy Countdown. */

    BCDind[i]=BCDind[i]+True;

    /* Check to ensure only two TD Sequential Buy patterns are being considered. */

    if (BCDind[i]>2)
    {
    BCDind[i]=BCDind[i]-1;
    kval=PreBCDstart[i];
    ResetBSpre(kval,i+1);
    PreBCDfin[i]=False;
    }

    /* Filters That Cancel a Developing TD Buy Countdown. */

    /* 1. If the price action rallies and generates a TD Sell Setup, or */
    /* 2. If the market trades higher and posts a true low above the true high of the prior TD Buy Setup – that is, TDST Resistance. */

    /* The second condition is dealt with later in the program. */

    if (SCDind[i]>0)
    {
    if (SCDind[i]>1)
    {
    SCDind[i]=SCDind[i]-1;
    kval=PreSCDstart[i];
    ResetSSpre(kval,i+1);
    }

    SCDind[i]=SCDind[i]-1;
    kval=CurSCDstart[i];
    ResetSScur(kval,i+1);

    }

    PreSCDfin[i]=False;
    CurSCDfin[i]=False;

    /* Determine if another Buy TD Sequential Setup has been initiated before the completion of the previous TD Buy Countdown. */

    if (BCDind[i]==2)
    {

    /* Record details of the previous Buy TD Sequential Setup and Countdown. */

    for (j=CurBCDstart[i-1]; j<i; j++)
    {
    PreBSmaxr[j]=CurBSmaxr[j];
    PreBSminr[j]=CurBSminr[j];
    PreBScnt[j]=CurBScnt[j];
    PreBSmaxrc[j]=CurBSmaxrc[j];
    PreBSminrc[j]=CurBSminrc[j];

    PreBCD[j]=CurBCD[j];
    PreBCDmaxr[j]=CurBCDmaxr[j];
    PreBCDminr[j]=CurBCDminr[j];
    PreBCD8[j]=CurBCD8[j];
    PreBCDtext[j]=CurBCDtext[j];
    PreBCDstart[j]=CurBCDstart[j];
    PreBCDfin[j]=CurBCDfin[j];
    }

    ResetBScur(CurBCDstart[i-1],i);
    }

    /* Record details of the new Buy TD Sequential Setup. */

    CurBCD[i]=0;
    CurBCDmaxr[i]=-999999;
    CurBCDminr[i]=999999;
    CurBCDtext[i]=0;
    CurBCDstart[i]=i;
    }

    /* Check Perl’s Rules for Trading TD Sell Setups Objectively. */

    if (Sell9Req[i]==True)
    {

    /* Perl’s Rule 1: Check for perfected TD Sell Setup. */

    if (High[i]>High[i-1])
    tmpval[i]=High[i];
    else
    tmpval[i]=High[i-1];

    if (tmpval[i]>=High[i-2] AND tmpval[i]>=High[i-3])
    {

    /* Perl’s Rule 2: Check for TDST resistance violation. */

    tmpval[i]=0;
    for (j=i-8; j<i+1; j++)
    {
    tmpval[i]=tmpval[i]+resvio[j];
    }

    if (tmpval[i]==0)
    {

    /* Perl’s Rule 3: Check the close of TD Sell Setup bar 9 is in close proximity to TDST resistance. */
    /* This rule is highly subjective. I have chosen the high of bar 9 to be within one ATR distance of the TDST resistance. */

    if (NOT IsEmpty(resinuse[i]))
    {
    if ((resinuse[i]-High[i])<distance[i]*gapprox)
    {

    /* Perl’s Risk Management: Calculating the TD Risk Level for Trading a TD Sell Setup. */

    TDSeqSell[i]=True;
    TDSeqsellstop[i]=HHV9[i]+(HHV9[i]-Low[i-WhenHHV9[i]]);
    TDSeqsellrisk[i]=TDSeqsellstop[i]-Close[i];
    TDSeqsellreward[i]=Close[i]-supinuse[i];
    TDSeqsellrrratio[i]=TDSeqsellreward[i]/TDSeqsellrisk[i];
    }
    }
    }
    }

    /* Initiate setup for TD Sell Countdown. */

    SCDind[i]=SCDind[i]+True;

    /* Check to ensure only two TD Sequential Buy patterns are being considered. */

    if (SCDind[i]>2)
    {
    SCDind[i]=SCDind[i]-1;
    kval=PreSCDstart[i];
    ResetSSpre(kval,i+1);
    PreSCDfin[i]=False;
    }

    /* Filters That Cancel a Developing TD Sell Countdown. */

    /* 1. If the price action declines and generates a TD Buy Setup, or */
    /* 2. If the market trades lower and posts a true high below the true low of the prior TD Sell Setup – that is, TDST support. */

    /* The second condition is dealt with later in the program. */

    if (BCDind[i]>0)
    {
    if (BCDind[i]>1)
    {
    BCDind[i]=BCDind[i]-1;
    kval=PreBCDstart[i];
    ResetBSpre(kval,i+1);
    }

    BCDind[i]=BCDind[i]-1;
    kval=CurBCDstart[i];
    ResetBScur(kval,i+1);

    }

    PreBCDfin[i]=False;
    CurBCDfin[i]=False;

    /* Determine if another Sell TD Sequential Setup has been initiated before the completion of the previous TD Sell Countdown. */

    if (SCDind[i]==2)
    {

    /* Record details of the previous Sell TD Sequential Setup and Countdown. */

    for (j=CurSCDstart[i-1]; j<i; j++)
    {
    PreSSmaxr[j]=CurSSmaxr[j];
    PreSSminr[j]=CurSSminr[j];
    PreSScnt[j]=CurSScnt[j];
    PreSSmaxrc[j]=CurSSmaxrc[j];
    PreSSminrc[j]=CurSSminrc[j];

    PreSCD[j]=CurSCD[j];
    PreSCDmaxr[j]=CurSCDmaxr[j];
    PreSCDminr[j]=CurSCDminr[j];
    PreSCD8[j]=CurSCD8[j];
    PreSCDtext[j]=CurSCDtext[j];
    PreSCDstart[j]=CurSCDstart[j];
    PreSCDfin[j]=CurSCDfin[j];
    }

    ResetSScur(CurSCDstart[i-1],i);
    }

    /* Record details of the new Sell TD Sequential Setup. */

    CurSCD[i]=0;
    CurSCDmaxr[i]=-999999;
    CurSCDminr[i]=999999;
    CurSCDtext[i]=0;
    CurSCDstart[i]=i;
    }

    /* Perl’s Rules for trading TD Countdowns. */
    /* Check to see if a TD Buy Countdown is being processed. */

    if (BCDind[i]>0)
    {
    if (BCDind[i]>1)
    {

    /* Record details of the ongoing (previous) Buy TD Sequential Setup. */

    PreBSmaxr[i]=PreBSmaxr[i-1];
    PreBSminr[i]=PreBSminr[i-1];
    PreBScnt[i]=PreBScnt[i-1];
    PreBSmaxrc[i]=PreBSmaxrc[i-1];
    PreBSminrc[i]=preBSminrc[i-1];

    /* Check to see if the ongoing (previous) TD Buy Countdown is still in progress and record details. */

    PreBCDstart[i]=PreBCDstart[i-1];
    PreBCD[i]=PreBCD[i-1]+Buyconseccloses[i];
    PreBCDmaxr[i]=PreBCDmaxr[i-1];
    PreBCDminr[i]=PreBCDminr[i-1];
    if (PreBCDminr[i]>Low[i] AND PreBCD[i]>0)
    {
    PreBCDmaxr[i]=High[i];
    PreBCDminr[i]=Low[i];
    }
    PreBCD8[i]=PreBCD8[i-1];
    if (PreBCD[i]==8 AND PreBCD[i-1]!=8) PreBCD8[i]=Close[i];

    /* Perl’s Rules to Complete a TD Buy Countdown. */
    /* 1. The Low of TD Buy Countdown bar 13 must be less than, or equal to, the close of TD Buy Countdown bar 8. */
    /* 2. The close of TD Buy Countdown bar 13 must be less than, or equal to, the low two bars earlier. */

    if (Buyconseccloses[i]==True)
    {
    if (PreBCD[i]<13)
    {
    PreBCDtext[i]=PreBCD[i];
    }
    else
    {
    if (PreBCD[i]>12 AND Low[i]<=PreBCD8[i])
    {
    PreBCDtext[i]=13;
    BCDplot[i]=PreBCDtext[i];

    /* Perl’s Risk Management for a TD Buy Countdown. */

    BCDrisk[i]=PreBCDminr[i]-(PreBCDmaxr[i]-PreBCDminr[i]);

    kval=PreBCDstart[i];
    ResetBSpre(kval,i+1);
    BCDind[i]=BCDind[i]-1;
    PreBCDfin[i]=i;
    }
    else
    {
    PreBCDtext[i]=43; // Deferred Countdown print “+”.
    }
    }
    }
    }

    /* Record details of the current Buy TD Sequential Setup. */

    if (CurBCDmaxr[i]<0)
    {
    CurBSmaxr[i]=BSmaxr[i];
    CurBSminr[i]=BSminr[i];
    CurBScnt[i]=BScnt[i];
    CurBSmaxrc[i]=BSmaxrc[i];
    CurBSminrc[i]=BSminrc[i];

    /* Record details of the current TD Buy Countdown. */

    CurBCD[i]=CurBCD[i]+Buyconseccloses[i];
    if (Buyconseccloses[i]==False)
    {
    CurBCDmaxr[i]=0;
    }
    else
    {
    CurBCDmaxr[i]=High[i];
    CurBCDminr[i]=Low[i];
    }
    }
    else
    {

    /* Record details of the current Buy TD Sequential Setup. */

    if (BSetupind[i]==True)
    {
    CurBSmaxr[i]=BSmaxr[i];
    CurBSminr[i]=BSminr[i];
    CurBScnt[i]=BScnt[i];
    CurBSmaxrc[i]=BSmaxrc[i];
    CurBSminrc[i]=BSminrc[i];
    }
    else
    {
    CurBSmaxr[i]=CurBSmaxr[i-1];
    CurBSminr[i]=CurBSminr[i-1];
    CurBScnt[i]=CurBScnt[i-1];
    CurBSmaxrc[i]=CurBSmaxrc[i-1];
    CurBSminrc[i]=CurBSminrc[i-1];
    }

    /* Record details of the current TD Buy Countdown. */

    CurBCDstart[i]=CurBCDstart[i-1];
    CurBCD[i]=CurBCD[i-1]+Buyconseccloses[i];
    CurBCDmaxr[i]=CurBCDmaxr[i-1];
    CurBCDminr[i]=CurBCDminr[i-1];
    if (CurBCDminr[i]>Low[i] AND CurBCD[i]>0)
    {
    CurBCDmaxr[i]=High[i];
    CurBCDminr[i]=Low[i];
    }
    CurBCD8[i]=CurBCD8[i-1];
    if (CurBCD[i]==8 AND CurBCD[i-1]!=8) CurBCD8[i]=Close[i];
    }

    /* Perl’s Rules to Complete a TD Buy Countdown. */
    /* 1. The Low of TD Buy Countdown bar 13 must be less than, or equal to, the close of TD Buy Countdown bar 8. */
    /* 2. The close of TD Buy Countdown bar 13 must be less than, or equal to, the low two bars earlier. */

    if (Buyconseccloses[i]==True)
    {
    if (CurBCD[i]<13)
    {
    CurBCDtext[i]=CurBCD[i];
    }
    else
    {
    if (CurBCD[i]>12 AND Low[i]<=CurBCD8[i])
    {
    CurBCDtext[i]=13;
    BCDplot[i]=CurBCDtext[i];

    /* Perl’s Risk Management for a TD Buy Countdown. */

    BCDrisk[i]=CurBCDminr[i]-(CurBCDmaxr[i]-CurBCDminr[i]);
    BCDrisk[i-1]=CurBCDminr[i];

    kval=CurBCDstart[i];
    ResetBScur(kval,i+1);
    BCDind[i]=BCDind[i]-1;
    CurBCDfin[i]=i;
    }
    else
    {
    CurBCDtext[i]=43; // Deferred Countdown use “+” sign.
    }
    }
    }

    /* Filters That Cancel a Developing TD Buy Countdown. */
    /* 1. If the price action rallies and generates a TD Sell Setup, or */
    /* 2. If the market trades higher and posts a true low above the true high of the prior TD Buy Setup – that is, TDST Resistance. */

    /* The first condition is dealt with earlier in the program. */

    if (Low[i]>HHV9[CurBCDstart[i]] AND CurBCDstart[i]>0)
    {
    BCDind[i]=BCDind[i]-1;
    kval=CurBCDstart[i];
    ResetBScur(kval,i+1);

    /* If we have an ongoing (previous) TD Buy Countdown then, make it current. */

    if (BCDind[i]>0)
    {
    kval=PreBCDstart[i];
    CopyBSpre(kval,i+1);
    ResetBSpre(kval,i+1);
    }
    }

    /* TD Buy Countdown Cancellation and Recycle Qualifiers. */

    if (BCDind[i]>1 AND BSetupind[i]==False AND BSetupind[i-1]==True)
    {

    /* TD Buy Countdown Cancellation Qualifier 1. */

    /* If the size of the true range of the most recently completed TD Buy Setup is equal to, or greater than, */
    /* the size of the previous TD Buy Setup, but less than 1.618 times it’s size then, */
    /* a TD Setup Recycle will occcur; that is, whichever TD Buy Setup has the larger true range will become */
    /* the active TD Buy Setup. */

    TRcur=CurBSmaxr[i]-CurBSminr[i];
    TRpre=PreBSmaxr[i]-PreBSminr[i];
    if (TRcur>=TRpre AND TRcur<1.618*TRpre)
    {
    if (TRcur>TRpre)
    {

    /* Reset the TD Buy Setup previous arrays. */

    BCDind[i]=BCDind[i]-1;
    kval=PreBCDstart[i];
    ResetBSpre(kval,i+1);
    }
    else
    {
    BCDind[i]=BCDind[i]-1;
    kval=CurBCDstart[i];
    ResetBSCur(kval,i+1);

    kval=PreBCDstart[i];
    CopyBSpre(kval,i+1);
    ResetBSpre(kval,i+1);
    }
    }

    /* TD Buy Countdown Cancellation Qualifier 2 (a TD Buy Setup Within a TD Buy Setup). */

    /* If the market has completed a TD Buy Setup that has a closing range within the true range */
    /* of the prior TD Buy Setup, without recording a TD Sell Setup between the two, and if */
    /* the current TD buy Setup has a price extreme within the true range of the prior TD Buy Setup, then */
    /* the prior TD BUY Setup is the active TD Setup, and the TD Buy Countdown relating to it remains intact. */

    if (BCDind[i]>1 AND CurBSmaxrc[i]<PreBSmaxr[i] AND CurBSminrc[i]>PreBSminr[i] AND (CurBSmaxr[i]<PreBSmaxr[i] OR CurBSminr[i]>PreBSminr[i]))
    {
    BCDind[i]=BCDind[i]-1;
    kval=CurBCDstart[i];
    ResetBSCur(kval,i+1);

    kval=PreBCDstart[i];
    CopyBSpre(kval,i+1);
    ResetBSpre(kval,I+1);
    }
    }

    /* TD Buy Countdown Recycle Qualifier. */

    /* An ‘R’ will appear when a TD Buy Setup that began before, on, or after the completion of a developing TD Buy Countdown, */
    /* but prior to a bullish TD Price Flip, extends to eighteen bars – that is, eighteen closes, with each one less than than */
    /* the close four price bars earlier. */

    if (CurBScnt[i]==18 AND CurBScnt[i-1]!=18)
    {
    BCDplot[i]=82; // Recycle Qualifier use the letter “R”.
    }

    /* Requirements for Validation of a TD Sequential 9-13-9 Buy Count. */

    /* 1. The TD Buy Setup must not begin before or on the same price bar as the completed TD Buy Countdown. */
    /* 2. The ensuing bullish TD Buy Setup must be preceded by a TD price flip, and */
    /* 3. No complted TD Sell Setup should occur prior to the appearence of the TD Buy Setup. */

    if (CurBCDfin[i]>0 AND TDSeqbuydigits[i]==9)
    {
    if (CurBCDfin[i]<(i-8))
    {
    BCDplot[i]=9139;

    /* Risk Management for the TD Sequential 9-13-9 */

    /* Subtract the true range of the price bar with the lowest true low in the TD Buy Countdown */
    /* and ensuing TD Buy Setup from the true low of that bar. */

    if (BCDrisk[CurBCDfin[i]-1]<LLV9[i])
    {
    BCDrisk[i]=BCDrisk[CurBCDfin[i]];
    }
    else
    {
    BCDrisk[i]=LLV9[i]-(High[i-whenLLV9[i]]-LLV9[i]);
    }
    }
    CurBCDfin[i]=False;
    }
    }

    /* Check to see if a TD Sell Countdown is being processed. */

    if (SCDind[i]>0)
    {
    if (SCDind[i]>1)
    {

    /* Record details of the ongoing (previous) Sell TD Sequential Setup. */

    PreSSmaxr[i]=PreSSmaxr[i-1];
    PreSSminr[i]=PreSSminr[i-1];
    PreSScnt[i]=PreSScnt[i-1];
    PreSSmaxrc[i]=PreSSmaxrc[i-1];
    PreSSminrc[i]=preSSminrc[i-1];

    /* Check to see if the ongoing (previous) TD Sell Countdown is still in progress and record details. */

    PreSCDstart[i]=PreSCDstart[i-1];
    PreSCD[i]=PreSCD[i-1]+Sellconseccloses[i];
    PreSCDmaxr[i]=PreSCDmaxr[i-1];
    PreSCDminr[i]=PreSCDminr[i-1];
    if (PreSCDmaxr[i]<High[i] AND PreSCD[i]>0)
    {
    PreSCDmaxr[i]=High[i];
    PreSCDminr[i]=Low[i];
    }
    PreSCD8[i]=PreSCD8[i-1];
    if (PreSCD[i]==8 AND PreSCD[i-1]!=8) PreSCD8[i]=Close[i];

    /* Perl’s Rules to Complete a TD Sell Countdown. */
    /* 1. The High of TD Sell Countdown bar 13 must be greater than, or equal to, the close of TD Sell Countdown bar 8. */
    /* 2. The close of TD Sell Countdown bar 13 must be greater than, or equal to, the high two bars earlier. */

    if (Sellconseccloses[i]==True)
    {
    if (PreSCD[i]<13)
    {
    PreSCDtext[i]=PreSCD[i];
    }
    else
    {
    if (PreSCD[i]>12 AND High[i]>=PreSCD8[i])
    {
    PreSCDtext[i]=13;
    SCDplot[i]=PreSCDtext[i];

    /* Perl’s Risk Management for a TD Buy Countdown. */

    SCDrisk[i]=PreSCDmaxr[i]+(PreSCDmaxr[i]-PreSCDminr[i]);

    kval=PreSCDstart[i];
    ResetSSpre(kval,i+1);
    SCDind[i]=SCDind[i]-1;
    PreSCDfin[i]=i;
    }
    else
    {
    PreSCDtext[i]=43;
    }
    }
    }
    }

    /* Record details of the current Sell TD Sequential Setup. */

    if (CurSCDmaxr[i]<0)
    {
    CurSSmaxr[i]=SSmaxr[i];
    CurSSminr[i]=SSminr[i];
    CurSScnt[i]=SScnt[i];
    CurSSmaxrc[i]=SSmaxrc[i];
    CurSSminrc[i]=SSminrc[i];

    /* Record details of the current TD Sell Countdown. */

    CurSCD[i]=CurSCD[i]+Sellconseccloses[i];
    if (Sellconseccloses[i]==False)
    {
    CurSCDmaxr[i]=0;
    }
    else
    {
    CurSCDmaxr[i]=High[i];
    CurSCDminr[i]=Low[i];
    }
    }
    else
    {

    /* Record details of the current Sell TD Sequential Setup. */

    if (SSetupind[i]==True)
    {
    CurSSmaxr[i]=SSmaxr[i];
    CurSSminr[i]=SSminr[i];
    CurSScnt[i]=SScnt[i];
    CurSSmaxrc[i]=SSmaxrc[i];
    CurSSminrc[i]=SSminrc[i];
    }
    else
    {
    CurSSmaxr[i]=CurSSmaxr[i-1];
    CurSSminr[i]=CurSSminr[i-1];
    CurSScnt[i]=CurSScnt[i-1];
    CurSSmaxrc[i]=CurSSmaxrc[i-1];
    CurSSminrc[i]=CurSSminrc[i-1];
    }

    /* Record details of the current TD Sell Countdown. */

    CurSCDstart[i]=CurSCDstart[i-1];
    CurSCD[i]=CurSCD[i-1]+Sellconseccloses[i];
    CurSCDmaxr[i]=CurSCDmaxr[i-1];
    CurSCDminr[i]=CurSCDminr[i-1];
    if (CurSCDmaxr[i]<High[i] AND CurSCD[i]>0)
    {
    CurSCDmaxr[i]=High[i];
    CurSCDminr[i]=Low[i];
    }
    CurSCD8[i]=CurSCD8[i-1];
    if (CurSCD[i]==8 AND CurSCD[i-1]!=8) CurSCD8[i]=Close[i];
    }

    /* Perl’s Rules to Complete a TD Sell Countdown. */
    /* 1. The high of TD Sell Countdown bar 13 must be greater than, or equal to, the close of TD Sell Countdown bar 8. */
    /* 2. The close of TD Sell Countdown bar 13 must be greater than, or equal to, the high two bars earlier. */

    if (Sellconseccloses[i]==True)
    {
    if (CurSCD[i]<13)
    {
    CurSCDtext[i]=CurSCD[i];
    }
    else
    {
    if (CurSCD[i]>12 AND High[i]>=CurSCD8[i])
    {
    CurSCDtext[i]=13;
    SCDplot[i]=CurSCDtext[i];

    /* Perl’s Risk Management for a TD Buy Countdown. */

    SCDrisk[i]=CurSCDmaxr[i]+(CurSCDmaxr[i]-CurSCDminr[i]);
    SCDrisk[i-1]=CurSCDmaxr[i];

    kval=CurSCDstart[i];
    ResetSScur(kval,i+1);
    SCDind[i]=SCDind[i]-1;
    CurSCDfin[i]=i;
    }
    else
    {
    CurSCDtext[i]=43; // Deferred Countdown use “+” sign.
    }
    }
    }

    /* Filters That Cancel a Developing TD Sell Countdown. */
    /* 1. If the price action declines and generates a TD Buy Setup, or */
    /* 2. If the market trades lower and posts a true high below the true low of the prior TD Sell Setup – that is, TDST support. */

    /* The first condition is dealt with earlier in the program. */

    if (High[i]<LLV9[CurSCDstart[i]] AND CurSCDstart[i]>0)
    {
    SCDind[i]=SCDind[i]-1;
    kval=CurSCDstart[i];
    ResetSScur(kval,i+1);

    /* If we have an ongoing (previous) TD Sell Countdown then, make it current. */

    if (SCDind[i]>0)
    {
    kval=PreSCDstart[i];
    CopySSpre(kval,i+1);
    ResetSSpre(kval,i+1);
    }
    }

    /* TD Sell Countdown Cancellation and Recycle Qualifiers. */

    if (SCDind[i]>1 AND SSetupind[i]==False AND SSetupind[i-1]==True)
    {

    /* TD Sell Countdown Cancellation Qualifier 1. */

    /* If the size of the true range of the most recently completed TD Sell Setup is equal to, or greater than, */
    /* the size of the previous TD Sell Setup, but less than 1.618 times it’s size then, */
    /* a TD Setup Recycle will occcur; that is, whichever TD Sell Setup has the larger true range will become */
    /* the active TD Sell Setup. */

    TRcur=CurSSmaxr[i]-CurSSminr[i];
    TRpre=PreSSmaxr[i]-PreSSminr[i];
    if (TRcur>=TRpre AND TRcur<1.618*TRpre)
    {
    if (TRcur>TRpre)
    {

    /* Reset the TD Sell Setup previous arrays. */

    SCDind[i]=SCDind[i]-1;
    kval=PreSCDstart[i];
    ResetSSpre(kval,i+1);
    }
    else
    {
    SCDind[i]=SCDind[i]-1;
    kval=CurSCDstart[i];
    ResetSSCur(kval,i+1);

    kval=PreSCDstart[i];
    CopySSpre(kval,i+1);
    ResetSSpre(kval,i+1);
    }
    }

    /* TD Sell Countdown Cancellation Qualifier 2 (a TD Sell Setup Within a TD Sell Setup). */

    /* If the market has completed a TD Sell Setup that has a closing range within the true range */
    /* of the prior TD Sell Setup, without recording a TD Buy Setup between the two, and if */
    /* the current TD Sell Setup has a price extreme within the true range of the prior TD Buy Setup, then */
    /* the prior TD Sell Setup is the active TD Setup, and the TD Sell Countdown relating to it remains intact. */

    if (SCDind[i]>1 AND CurSSmaxrc[i]<PreSSmaxr[i] AND CurSSminrc[i]>PreSSminr[i] AND (CurSSmaxr[i]<PreSSmaxr[i] OR CurSSminr[i]>PreSSminr[i]))
    {
    SCDind[i]=SCDind[i]-1;
    kval=CurSCDstart[i];
    ResetSSCur(kval,i+1);

    kval=PreSCDstart[i];
    CopySSpre(kval,i+1);
    ResetSSpre(kval,i+1);
    }
    }

    /* TD Buy Countdown Recycle Qualifier. */

    /* An ‘R’ will appear when a TD Sell Setup that began before, on, or after the completion of a developing TD Sell Countdown, */
    /* but prior to a bearish TD Price Flip, extends to eighteen bars – that is, eighteen closes, with each one greater than than */
    /* the close four price bars earlier. */

    if (CurSScnt[i]==18 AND CurSScnt[i-1]!=18)
    {
    SCDplot[i]=82; // Recycle Qualifier use the letter “R”.
    }

    /* Requirements for Validation of a TD Sequential 9-13-9 Sell Count. */

    /* 1. The TD Sell Setup must not begin before or on the same price bar as the completed TD Sell Countdown. */
    /* 2. The ensuing bullish TD Sell Setup must be preceded by a TD price flip, and */
    /* 3. No completed TD Buy Setup should occur prior to the appearence of the TD Sell Setup. */

    if (CurSCDfin[i]>0 AND TDSeqselldigits[i]==9)
    {
    if (CurSCDfin[i]<(i-8))
    {
    SCDplot[i]=9139;

    /* Risk Management for the TD Sequential 9-13-9 */

    /* Add the true range of the price bar with the highest true high in the TD Sell Countdown */
    /* and ensuing TD Sell Setup to the true high of that bar. */

    if (SCDrisk[CurSCDfin[i]-1]>HHV9[i])
    {
    SCDrisk[i]=SCDrisk[CurSCDfin[i]];
    }
    else
    {
    SCDrisk[i]=HHV9[i]+(HHV9[i]-Low[i-WhenHHV9[i]]);
    }
    }
    CurSCDfin[i]=False;
    }
    }
    }

    /* Sort plot area */

    Lowestlow=LowestVisibleValue(Low);
    Highesthigh=HighestVisibleValue(High);

    Plotrange=Highesthigh-Lowestlow;
    Plotlow=IIf(Plotall==False,(Lowestlow-(Plotpercent/100*Plotrange)),0);
    Plothigh=IIf(Plotall==False,(Highesthigh+(Plotpercent/100*Plotrange)),999999);

    /* perform plot routines. */

    Plot(C, “”, -1, styleCandle);

    /* Plot red buy digits and pink Countdown digits. */

    PlotShapes( IIf( BCDplot==13, shapeUpArrow, IIf(BCDplot==9139, shapeHollowUpArrow, shapeNone)), colorDarkRed,0,IIf(BCDplot>0,Low,High));

    for (i=0; i<BarCount; i++)
    {
    dist1[i] = reddist[i]*distance[i];
    if (TDSeqbuydigits[i]>0) PlotText( ” ” + NumToStr(TDSeqbuydigits[ i ],1.0), i, H[ i ]+dist1[i], colorRed );

    if (BCDplot[i]==82) PlotText(“R”,i,IIf(TDSeqbuydigits[i]>0,H[i]+2*dist1[i],H[i]+dist1[i]), colorDarkRed);

    if (BCDind[i]>1)
    {
    if (PreBCDtext[i]>0 AND PreBCDtext[i]<13) PlotText(” ” + NumToStr(PreBCDtext[ i ],1.0),IIf(PreBCDtext[i]>9,i-0.5,i),IIf(TDSeqbuydigits[i]>0,H[i]+2*dist1[i],H[i]+dist1[i]), colorPink);
    if (PreBCDtext[i]==43) PlotText(“+”,i+0.25,IIf(TDSeqbuydigits[i]>0,H[i]+2*dist1[i],H[i]+dist1[i]), colorPink);
    }
    if (BCDind[i]==1)
    {
    if (CurBCDtext[i]>0 AND CurBCDtext[i]<13) PlotText(” ” + NumToStr(CurBCDtext[ i ],1.0),IIf(CurBCDtext[i]>9,i-0.5,i),IIf(TDSeqbuydigits[i]>0,H[i]+2*dist1[i],H[i]+dist1[i]), colorDarkRed);
    if (CurBCDtext[i]==43) PlotText(“+”,i+0.25,IIf(TDSeqbuydigits[i]>0,H[i]+2*dist1[i],H[i]+dist1[i]), colorDarkRed);
    }

    }

    /* plot blue sell digits. */

    PlotShapes( IIf( SCDplot==13, shapeDownArrow, IIf(SCDplot==9139, shapeHollowDownArrow, shapeNone)), colorIndigo,0,IIf(SCDplot>0,High,Low));

    for (i=0; i<BarCount; i++)
    {
    dist1[i] = bluedist[i]*distance[i];
    if (TDSeqselldigits[i]>0) PlotText( ” ” + NumToStr(TDSeqselldigits[ i ],1.0), i, L[ i ]-dist1[i], colorBlue );

    if (SCDplot[i]==82) PlotText(“R”,i,IIf(TDSeqselldigits[i]>0,L[i]-2*dist1[i],L[i]-dist1[i]), colorIndigo);

    if (SCDind[i]>1)
    {
    if (PreSCDtext[i]>0 AND PreSCDtext[i]<13) PlotText(” ” + NumToStr(PreSCDtext[ i ],1.0),IIf(PreSCDtext[i]>9,i-0.5,i),IIf(TDSeqselldigits[i]>0,L[i]-2*dist1[i],L[i]-dist1[i]), colorTurquoise);
    if (PreSCDtext[i]==43) PlotText(“+”,i+0.25,IIf(TDSeqselldigits[i]>0,L[i]-2*dist1[i],L[i]-dist1[i]), colorTurquoise);
    }
    if (SCDind[i]==1)
    {
    if (CurSCDtext[i]>0 AND CurSCDtext[i]<13) PlotText(” ” + NumToStr(CurSCDtext[ i ],1.0),IIf(CurSCDtext[i]>9,i-0.5,i),IIf(TDSeqselldigits[i]>0,L[i]-2*dist1[i],L[i]-dist1[i]), colorIndigo);
    if (CurSCDtext[i]==43) PlotText(“+”,i+0.25,IIf(TDSeqselldigits[i]>0,L[i]-2*dist1[i],L[i]-dist1[i]), colorIndigo);
    }
    }

    PlotShapes( IIf( TDSeqBuy, shapeUpArrow, shapeNone ), colorYellow,0,IIf(TDSeqbuy,Low,High));
    PlotShapes( IIf( TDSeqsell, shapeDownArrow, shapeNone ), colorYellow,0,IIf(TDSeqsell,High,Low));
    //PlotShapes( IIf( supvio, IIf(supvio, shapeHollowDownTriangle, shapeUpTriangle), shapeNone ), colorYellow,0,IIf(supvio,High,Low));
    //PlotShapes( IIf( resvio, IIf(resvio, shapeHollowUpTriangle, shapeDownTriangle), shapeNone ), colorYellow,0,IIf(resvio,Low,High));

    Plot(IIf(res1<Plothigh,res1,Null),”res1″,colorOrange,styleLine);
    Plot(IIf(res2<Plothigh,res2,Null),”res2″,colorYellow,styleLine);
    Plot(IIf(res3<Plothigh,res3,Null),”res3″,colorBlue,styleLine);
    Plot(IIf(res4<Plothigh,res4,Null),”res4″,colorGreen,styleLine);
    Plot(IIf(res5<Plothigh,res5,Null),”res5″,colorRed,styleLine);
    Plot(IIf(res6<Plothigh,res6,Null),”res6″,colorWhite,styleLine);
    Plot(IIf(res7<Plothigh,res7,Null),”res7″,colorBrown,styleLine);
    Plot(IIf(res8<Plothigh,res8,Null),”res8″,colorIndigo,styleLine);
    Plot(IIf(res9<Plothigh,res9,Null),”res9″,colorDarkGreen,styleLine);
    Plot(IIf(sup1>PlotLow,sup1,Null),”sup1″,colorOrange,styleLine);
    Plot(IIf(sup2>PlotLow,sup2,Null),”sup2″,colorYellow,styleLine);
    Plot(IIf(sup3>PlotLow,sup3,Null),”sup3″,colorBlue,styleLine);
    Plot(IIf(sup4>PlotLow,sup4,Null),”sup4″,colorGreen,styleLine);
    Plot(IIf(sup5>PlotLow,sup5,Null),”sup5″,colorRed,styleLine);
    Plot(IIf(sup6>PlotLow,sup6,Null),”sup6″,colorWhite,styleLine);
    Plot(IIf(sup7>PlotLow,sup7,Null),”sup7″,colorBrown,styleLine);
    Plot(IIf(sup8>PlotLow,sup8,Null),”sup8″,colorIndigo,styleLine);
    Plot(IIf(sup9>PlotLow,sup9,Null),”sup9″,colorDarkGreen,styleLine);

    /* Automatic Analysis Explore Routines. */

    /* Setup Column Information. */

    NumColumns=8;
    Column0=IIf(TDSeqBuy==True,True,False);
    Column1=IIf(BCDplot==13,True,False);
    Column2=IIf(BCDplot==9139,True,False);
    Column3=IIf(BCDplot==82,True,False);
    Column4=IIf(TDSeqSell==True,True,False);
    Column5=IIf(SCDplot==13,True,False);
    Column6=IIf(SCDplot==9139,True,False);
    Column7=IIf(SCDplot==82,True,False);

    Column0Name = “TDSeq Buy “;
    Column1Name = “BCD 13 “;
    Column2Name = “BCD 9-13-9 “;
    Column3Name = “TDST Buy ‘R’ “;
    Column4Name = “TDSeq Sell “;
    Column5Name = “SCD 13 “;
    Column6Name = “SCD 9-13-9 “;
    Column7Name = “TDST Sell ‘R’ “;

    Filter= IIf(TDSeqBuy==True OR BCDplot==13 OR BCDplot==9139 OR BCDplot==82,True,False) OR IIf(TDSeqSell==True OR SCDplot==13 OR SCDplot==9139 OR SCDplot==82,True,False);

    /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
    Title = “{{DATE}} – “+Name()+” (“+ FullName()+ “) – “+” Open=”+O+”, High=”+H+”, Low=”+L+”, Close=”+C+StrFormat(” (%.2f %.1f%%) “,IIf(ROC(C,1)==0,0,C-Ref(C,-1)),SelectedValue( ROC( C, 1 )))+
    “\n”+EncodeColor(colorBlue) + WriteIf(TDSeqBuy==True, “\nPotential TDST Buy : Risk= ” + WriteVal(TDSeqbuyrisk,8.2) + ” Reward= ” + WriteVal(TDSeqbuyreward,8.2) + ” Reward Risk Ratio= ” + WriteVal(TDSeqbuyrrratio,8.2) + ” Stop @ ” + WriteVal(TDSeqbuystop,8.2),””) +
    “”+EncodeColor(colorRed) + WriteIf(TDSeqsell==True, “\nPotential TDST Short : Risk= ” + WriteVal(TDSeqsellrisk,8.2) + ” Reward= ” + WriteVal(TDSeqsellreward,8.2) + ” Reward Risk Ratio= ” + WriteVal(TDSeqsellrrratio,8.2) + ” Stop @ ” + WriteVal(TDSeqsellstop,8.2),””) +
    “\n”+EncodeColor(colorBlue) + WriteIf(BCDplot==13, “\nBuy CD 13 trade : Stop loss at ” + WriteVal(BCDRisk,8.2) + ” Risk is ” + WriteVal(Close-BCDRisk,8.2),””) +
    “”+EncodeColor(colorBlue) + WriteIf(BCDplot==9139, “\nBuy CD 9-13-9 trade : Stop loss at ” + WriteVal(BCDRisk,8.2) + ” Risk is ” + WriteVal(Close-BCDRisk,8.2),””) +
    “\n”+EncodeColor(colorRed) + WriteIf(SCDplot==13, “\nSell CD 13 trade : Stop loss at ” + WriteVal(SCDRisk,8.2) + ” Risk is ” + WriteVal(SCDRisk-Close,8.2),””) +
    “”+EncodeColor(colorRed) + WriteIf(SCDplot==9139, “\nSell CD 9-13-9 trade : Stop loss at ” + WriteVal(SCDRisk,8.2) + ” Risk is ” + WriteVal(SCDRisk-Close,8.2),””) +
    “\n”+EncodeColor(colorGold)+” “+WriteVal(BarCount)+” =BarCount” + ” bar Number = ” + WriteVal(Cum(1)-1,8.0);

    _SECTION_END() ;

    in reply to: สูตร CDC RSI over bot-sold 20160516 #17843
    Akee
    Participant

    /*
    {CDC RSI Over Bot/Sold 160516}
    x1:=Mov(RSI(14),5,S);
    x2:=OscP(12,26,E,%)<=-3 AND ROC(OscP(12,26,E,%),5,$)=-Sum(Abs(ROC(OscP(12,26,E,%),1,$)),5) OR (x1<=30);
    x3:=x2 OR Ref(x2,-1) OR Ref(x2,-2) OR Ref(x2,-3) OR Ref(x2,-4);
    x4:=OscP(12,26,E,%)>=3 AND ROC(OscP(12,26,E,%),5,$)=Sum(Abs(ROC(OscP(12,26,E,%),1,$)),5) OR (x1>=70);
    x5:=x4 OR Ref(x4,-1) OR Ref(x4,-2) OR Ref(x4,-3) OR Ref(x4,-4);
    x6:=BarsSince((x3=0 AND Ref(x3,-1)=1))>3 AND BarsSince((x3=0 AND Ref(x3,-1)=1))<11 AND C>Ref(HHV(C,3),-1);
    x7:=BarsSince((x5=0 AND Ref(x5,-1)=1))>3 AND BarsSince((x5=0 AND Ref(x5,-1)=1))<11 AND C<Ref(LLV(C,3),-1);
    x1; If(x3,20,30); If(x5,80,70); If(x6,40,48); If(x7,60,52); 30; 70;
    */

    //SetChartOptions(0,chartShowArrows|chartShowDates);
    GraphXSpace = 10;

    // X1 = RSI.14 Smooth
    x1 = MA( RSI( 14 ), 5 ) ;

    // X2 = Over_Bot
    x2 = OscP( 12, 26 ) <= -3 AND ROC( OscP( 12, 26 ), 5 ) == -Sum( Abs( ROC( OscP( 12, 26 ), 1 ) ), 5 )
    OR( x1 <= 30 );
    // X3 = OverBot 5 Days
    x3 = x2 OR Ref( x2, -1 )
    OR Ref( x2, -2 )
    OR Ref( x2, -3 )
    OR Ref( x2, -4 ) ;
    // X4 = Over_Sold
    x4 = OscP( 12, 26 ) >= 3 AND ROC( OscP( 12, 26 ), 5 ) == Sum( Abs( ROC( OscP( 12, 26 ), 1 ) ), 5 )
    OR( x1 >= 70 ) ;
    // X4 = OverSold 5 Days
    x5 = x4 OR Ref( x4, -1 )
    OR Ref( x4, -2 )
    OR Ref( x4, -3 )
    OR Ref( x4, -4 ) ;
    // X6 = Buy
    x6 = BarsSince( ( x3 == 0 AND Ref ( x3, -1 ) == 1 ) ) > 3 AND BarsSince ( ( x3 == 0 AND Ref( x3, -1 ) == 1 ) )<11
    AND C > Ref( HHV( C, 3 ), -1 ) ;

    // X6 = Sell
    x7 = BarsSince( ( x5 == 0 AND Ref( x5, -1 ) == 1 ) ) > 3 AND BarsSince( ( x5 == 0 AND Ref( x5, -1 ) == 1 ) ) < 11
    AND C < Ref( LLV( C, 3 ), -1 ) ;

    Plot( RSI( 14 ) , “RSI.14” , colorGrey50 , styleLine ) ;
    Plot( X1 , “MA.(RSI.14)” , colorYellow , styleLine ) ;
    Plot( IIf( x3, 20, 30 ) , “X3” , colorGreen , styleLine | styleNoLabel | styleNoTitle) ;
    Plot( IIf( x5, 80, 70 ) , “X5” , colorRed , styleLine | styleNoLabel | styleNoTitle) ;

    PlotShapes ( shapeUpArrow*X6 , colorLime , 0 , X1 ) ;
    PlotShapes ( shapeDownArrow*X7 , colorOrange , 0 , X1 ) ;

    Plot( 30 , “” , colorWhite , styleDashed | styleNoLabel | styleNoTitle) ;
    Plot( 50 , “” , colorWhite , styleDashed | styleNoLabel | styleNoTitle) ;
    Plot( 70 , “” , colorWhite , styleDashed | styleNoLabel | styleNoTitle) ;

    in reply to: CDC Action Zone Basic / Default #16261
    Akee
    Participant

    ขอบคุณครับ

Viewing 4 posts - 1 through 4 (of 4 total)